International Standard Book Number

The International Standard Book Number (ISBN) is a unique numeric commercial book identifier based upon the 9-digit Standard Book Numbering (SBN) code created by Gordon Foster, Emeritus Professor of Statistics at Trinity College, Dublin, for the booksellers and stationers WHSmith and others in 1965. The ISBN configuration of recognition was generated in 1967 by David Whitaker (regarded as the "Father of the ISBN") and Emery Koltay (who later became director of the U.S. ISBN agency, Bowker).

The 10-digit ISBN format was developed by the International Organization for Standardization (ISO) and was published in 1970 as international standard ISO 2108. The United Kingdom continued to use the 9-digit SBN code until 1974. An SBN may be converted to an ISBN by prefixing the digit "0". ISO has appointed the International ISBN Agency as the registration authority for ISBN worldwide and the ISBN Standard is developed under the control of ISO Technical Committee 46/Subcommittee 9 TC 46/SC 9. The ISO on-line facility only refers back to 1978.

Since 1 January 2007, ISBNs have contained 13 digits, a format that is compatible with "Bookland" European Article Number EAN-13s.

Occasionally, a book may appear without a printed ISBN if it is printed privately or the author does not follow the usual ISBN procedure; however, this can be rectified later.

Another identifier, the International Standard Serial Number (ISSN), identifies periodical publications such as magazines.

Overview

An ISBN is assigned to each edition and variation (except reprintings) of a book. For example, an ebook, a paperback, and a hardcover edition of the same book would each have a different ISBN. The ISBN is 13 digits long if assigned on or after 1 January 2007, and 10 digits long if assigned before 2007. An International Standard Book Number consists of 4 parts (if it is a 10 digit ISBN) or 5 parts (for a 13 digit ISBN):

for a 13-digit ISBN, a prefix element - a GS1 prefix: so far 978 or 979 have been made available by GS1,
the registration group element, (language-sharing country group, individual country or territory)
the registrant element,
the publication element, and
a checksum character or check digit.

A 13-digit ISBN can be separated into its parts (prefix element, registration group, registrant, publication and check digit), and when this is done it is customary to separate the parts with hyphens or spaces. Separating the parts (registration group, registrant, publication and check digit) of a 10-digit ISBN is also done with either hyphens or spaces. Figuring out how to correctly separate a given ISBN number is complicated, because most of the parts do not use a fixed number of digits.

How ISBNs are issued

ISBN issuance is country-specific, in that ISBNs are issued by the ISBN registration agency that is responsible for that country or territory regardless of the publication language. The ranges of ISBNs assigned to any particular country are based on the publishing profile of the country concerned, and so the ranges will vary depending on the number of books and the number, type, and size of publishers that are active. Some ISBN registration agencies are based in national libraries or within ministries of culture and thus may receive direct funding from government to support their services. In other cases, the ISBN registration service is provided by organisations such as bibliographic data providers that are not government funded. In Canada, ISBNs are issued at no cost with the stated purpose of encouraging Canadian culture. In the United Kingdom, United States, and some other countries, where the service is provided by non-government-funded organisations, the issuing of ISBNs requires payment of a fee.

Australia: ISBNs are issued by the commercial library services agency Thorpe-Bowker, and prices range from $42 for a single ISBN (plus a $55 registration fee for new publishers) to $2,890 for a block of 1,000 ISBNs.

Canada: Library and Archives Canada, a government agency, is responsible for issuing ISBNs, and there is no cost. Works in French are issued an ISBN by the BibliothÃ¨que et Archives nationales du QuÃ©bec.

India: The Raja Rammohun Roy Library Foundation (RRRLF), part of the Ministry of Culture, is responsible for registration of Indian publishers, authors, universities, institutions, and government departments that are responsible for publishing books.

Italy: The privately held company EDISER srl, owned by Associazione Italiana Editori (Italian Publishers Association) is responsible for issuing ISBNs. The original national prefix 978-88 is reserved for publishing companies, starting at â‚¬49 for a ten-codes block while a new prefix 979-12 is dedicated to self-publishing authors, at a fixed price of â‚¬25 for a single code.

Pakistan: The National Library of Pakistan is responsible for ISBN registrations for Pakistani publishers, authors, universities, institutions, and government departments that are responsible for publishing books.

United Kingdom and Republic of Ireland: The privately held company Nielsen Book Services Ltd, part of Nielsen Holdings N.V., is responsible for issuing ISBNs in blocks of 10, 100 or 1000. Prices start from Â£120 (plus VAT) for the smallest block on a standard turnaround of ten days.

United States: In the United States, the privately held company R.R. Bowker issues ISBNs. There is a charge that varies depending upon the number of ISBNs purchased, with prices starting at $125.00 for a single number.

Publishers and authors in other countries obtain ISBNs from their respective national ISBN registration agency. A directory of ISBN agencies is available on the International ISBN Agency website.

Registration group identifier

The registration group identifier is a 1- to 5-digit number that is valid within a single prefix element (i.e. one of 978 or 979). Registration group identifiers have primarily been allocated within the 978 prefix element. The single-digit group identifiers within the 978 prefix element are: 0 or 1 for English-speaking countries; 2 for French-speaking countries; 3 for German-speaking countries; 4 for Japan; 5 for Russian-speaking countries; and 7 for People's Republic of China. An example 5-digit group identifier is 99936, for Bhutan. The allocated group IDs are: 0â€"5, 600â€"621, 7, 80â€"94, 950â€"989, 9926â€"9989, and 99901â€"99976. Books published in rare languages typically have longer group identifiers.

Within the 979 prefix element, the registration group identifier 0 is reserved for compatibility with International Standard Music Numbers (ISMNs), but such material is not actually assigned an ISBN. The registration group identifiers within prefix element 979 that have been assigned are 10 for France, 11 for the Republic of Korea, and 12 for Italy.

The original 9-digit standard book number (SBN) had no registration group identifier, but affixing a zero (0) as a prefix to a 9-digit SBN creates a valid 10-digit ISBN.

Registrant element

The national ISBN agency assigns the registrant element (cf. Category:ISBN agencies) and an accompanying series of ISBNs within that registrant element to the publisher; the publisher then allocates one of the ISBNs to each of its books. In most countries, a book publisher is not required by law to assign an ISBN; however, most book stores only handle ISBN bearing merchandise.

A listing of more than 900,000 assigned publisher codes is published, and can be ordered in book form (â‚¬1399, US$1959). The web site of the ISBN agency does not offer any free method of looking up publisher codes. Partial lists have been compiled (from library catalogs) for the English-language groups: identifier 0 and identifier 1.

Publishers receive blocks of ISBNs, with larger blocks allotted to publishers expecting to need them; a small publisher may receive ISBNs of one or more digits for the registration group identifier, several digits for the registrant, and a single digit for the publication element. Once that block of ISBNs is used, the publisher may receive another block of ISBNs, with a different registrant element. Consequently, a publisher may have different allotted registrant elements. There also may be more than one registration group identifier used in a country. This might occur once all the registrant elements from a particular registration group have been allocated to publishers.

By using variable block lengths, registration agencies are able to customise the allocations of ISBNs that they make to publishers. For example, a large publisher may be given a block of ISBNs where fewer digits are allocated for the registrant element and many digits are allocated for the publication element; likewise, countries publishing many titles have few allocated digits for the registration group identifier and many for the registrant and publication elements. Here are some sample ISBN-10 codes, illustrating block length variations.

Pattern for English language ISBNs

English-language registration group elements are 0 and 1 (2 of more than 220 registration group elements). These two registration group elements are divided into registrant elements in a systematic pattern, which allows their length to be determined, as follows:

Check digits

A check digit is a form of redundancy check used for error detection, the decimal equivalent of a binary check bit. It consists of a single digit computed from the other digits in the message.

ISBN-10 check digits

The 2001 edition of the official manual of the International ISBN Agency says that the ISBN-10 check digitÂ â€" which is the last digit of the ten-digit ISBNÂ â€" must range from 0 to 10 (the symbol X is used for 10), and must be such that the sum of all the ten digits, each multiplied by its (integer) weight, descending from 10 to 1, is a multiple of 11.

For example, for an ISBN-10 of 0-306-40615-2:

Formally, using modular arithmetic, we can say:

It is also true for ISBN-10's that the sum of all the ten digits, each multiplied by its weight in ascending order from 1 to 10, is a multiple of 11. For this example:

Formally, we can say:

The two most common errors in handling an ISBN (e.g., typing or writing it) are a single altered digit or the transposition of adjacent digits. It can be proved that all possible valid ISBN-10's have at least two digits different from each other. It can also be proved that there are no pairs of valid ISBN-10's with eight identical digits and two transposed digits. (These are true only because the ISBN is less than 11 digits long, and because 11 is a prime number.) The ISBN check digit method therefore ensures that it will always be possible to detect these two most common types of error, i.e. if either of these types of error has occurred, the result will never be a valid ISBNÂ â€" the sum of the digits multiplied by their weights will never be a multiple of 11. However, if the error occurs in the publishing house and goes undetected, the book will be issued with an invalid ISBN.

In contrast, it is possible for other types of error, such as two altered non-transposed digits, or three altered digits, to result in a valid ISBN number (although it is still unlikely).

ISBN-10 check digit calculation

Modular arithmetic is convenient for calculating the check digit using modulus 11. Each of the first nine digits of the ten-digit ISBNÂ â€" excluding the check digit, itselfÂ â€" is multiplied by a number in a sequence from 10 to 2, and the remainder of the sum, with respect to 11, is computed. The resulting remainder, plus the check digit, must equal 11; therefore, the check digit is (11 minus the remainder of the sum of the products modulo 11) modulo 11. Taking the remainder modulo 11 a second time accounts for the possibility that the first remainder is 0. Without the second modulo operation the calculation could end up with 11 - 0 = 11 which is invalid.

For example, the check digit for an ISBN-10 of 0-306-40615-? is calculated as follows:

Thus the check digit is 2, and the complete sequence is ISBN 0-306-40615-2. The value required to satisfy this condition might be 10; if so, an 'X' should be used.

ISBN-13 check digit calculation

The 2005 edition of the International ISBN Agency's official manual describes how the 13-digit ISBN check digit is calculated. The ISBN-13 check digit, which is the last digit of the ISBN, must range from 0 to 9 and must be such that the sum of all the thirteen digits, each multiplied by its (integer) weight, alternating between 1 and 3, is a multiple of 10.

Formally, using modular arithmetic, we can say:

The calculation of an ISBN-13 check digit begins with the first 12 digits of the thirteen-digit ISBN (thus excluding the check digit itself). Each digit, from left to right, is alternately multiplied by 1 or 3, then those products are summed modulo 10 to give a value ranging from 0 to 9. Subtracted from 10, that leaves a result from 1 to 10. A zero (0) replaces a ten (10), so, in all cases, a single check digit results.

For example, the ISBN-13 check digit of 978-0-306-40615-? is calculated as follows:

  s = 9Ã—1 + 7Ã—3 + 8Ã—1 + 0Ã—3 + 3Ã—1 + 0Ã—3 + 6Ã—1 + 4Ã—3 + 0Ã—1 + 6Ã—3 + 1Ã—1 + 5Ã—3    =   9 +  21 +   8 +   0 +   3 +   0 +   6 +  12 +   0 +  18 +   1 +  15    = 93  93 / 10 = 9 remainder 3  10 â€"  3 = 7

Thus, the check digit is 7, and the complete sequence is ISBN 978-0-306-40615-7.

Formally, the ISBN-13 check digit calculation is:

This check systemÂ â€" similar to the UPC check digit formulaÂ â€" does not catch all errors of adjacent digit transposition. Specifically, if the difference between two adjacent digits is 5, the check digit will not catch their transposition. For instance, the above example allows this situation with the 6 followed by a 1. The correct order contributes 3Ã—6+1Ã—1 = 19 to the sum; while, if the digits are transposed (1 followed by a 6), the contribution of those two digits will be 3Ã—1+1Ã—6 = 9. However, 19 and 9 are congruent modulo 10, and so produce the same, final result: both ISBNs will have a check digit of 7. The ISBN-10 formula uses the prime modulus 11 which avoids this blind spot, but requires more than the digits 0-9 to express the check digit.

Additionally, if the sum of the 2nd, 4th, 6th, 8th, 10th, and 12th digits is tripled then added to the remaining digits (1st, 3rd, 5th, 7th, 9th, 11th, and 13th), the total will always be divisible by 10 (i.e., end in 0).

ISBN-10 to ISBN-13 conversion

The conversion is quite simple as one only needs to prefix "978" to the existing number and calculate the new checksum using the ISBN-13 algorithm.

Errors in usage

Publishers and libraries have varied policies about the use of the ISBN check digit. Publishers sometimes fail to check the correspondence of a book title and its ISBN before publishing it; that failure causes book identification problems for libraries, booksellers, and readers.

Most libraries and booksellers display the book record for an invalid ISBN issued by the publisher. The Library of Congress catalogue contains books published with invalid ISBNs, which it usually tags with the phrase "Cancelled ISBN". However, book-ordering systems such as Amazon.com will not search for a book if an invalid ISBN is entered to its search engine.

eISBN

Only the term "ISBN" should be used; the terms "eISBN" and "e-ISBN" have historically been sources of confusion and should be avoided. If a book exists in one or more digital (e-book) formats, each of those formats must have its own ISBN. In other words, each of the three separate EPUB, Amazon Kindle, and PDF formats of a particular book will have its own specific ISBN. They should not share the ISBN of the paper version, and there is no generic "eISBN" which encompasses all the e-book formats for a title.

EAN format used in barcodes, and upgrading

Currently the barcodes on a book's back cover (or inside a mass-market paperback book's front cover) are EAN-13; they may have a separate barcode encoding five digits for the currency and the recommended retail price. For 10 digit ISBNs, the number "978", the Bookland "country code", is prefixed to the ISBN in the barcode data, and the check digit is recalculated according to the EAN13 formula (modulo 10, 1x and 3x weighting on alternate digits).

Partly because of an expected shortage in certain ISBN categories, the International Organization for Standardization (ISO) decided to migrate to a thirteen-digit ISBN (ISBN-13). The process began 1 January 2005 and was planned to conclude 1 January 2007. As of 2011, all the 13-digit ISBNs began with 978. As the 978 ISBN supply is exhausted, the 979 prefix will be introduced. Part of the 979 prefix is reserved for use with the Musicland code for musical scores with an ISMN. 10 digit ISMN codes differed visually as they began with an "M" letter; the bar code represents the "M" as a zero (0), and for checksum purposes it counted as a 3. All ISMNs are now 13 digits commencing 979-0; 979-1 to 979-9 will be used by ISBN.

Publisher identification code numbers are unlikely to be the same in the 978 and 979 ISBNs, likewise, there is no guarantee that language area code numbers will be the same. Moreover, the ten-digit ISBN check digit generally is not the same as the thirteen-digit ISBN check digit. Because the GTIN-13 is part of the Global Trade Item Number (GTIN) system (that includes the GTIN-14, the GTIN-12, and the GTIN-8), the 13-digit ISBN falls within the 14-digit data field range.

Barcode format compatibility is maintained, because (aside from the group breaks) the ISBN-13 barcode format is identical to the EAN barcode format of existing ISBN 10s. So, migration to an EAN-based system allows booksellers the use of a single numbering system for both books and non-book products that is compatible with existing ISBN based data, with only minimal changes to information technology systems. Hence, many booksellers (e.g., Barnes & Noble) migrated to EAN barcodes as early as March 2005. Although many American and Canadian booksellers were able to read EAN-13 barcodes before 2005, most general retailers could not read them. The upgrading of the UPC barcode system to full EAN-13, in 2005, eased migration to the ISBN-13 in North America.

Notes and references

External links

ISO 2108:2005 at www.iso.org
"Are You Ready for ISBN-13?". R.R. Bowker LLC.Â
Description of the ISBN to EAN upgrade process at bookweb.org
International ISBN Agencyâ€"coordinates and supervises the worldwide use of the ISBN system.
Numerical List of Group Identifiers List of language/region prefixes
Free conversion tool: ISBN-10 to ISBN-13 & ISBN-13 to ISBN-10 from the ISBN agency. Also shows correct hyphenation & verifies if ISBNs are valid or not.
RFC 3187 Using International Standard Book Numbers as Uniform Resource Names (URN)
Implementation guidelinesÂ PDFÂ (51.0Â KB) for the 13-digit ISBN code.

International Standard Book Number

Sunday, March 8, 2015